Free UPS Ground Shipping on orders over $250

Weha Donkey Quartz Polishing Pad 4" 1000 Grit

In Stock
Can’t find what you’re looking for? Item out of stock? Call us at 1-800-458-6222 for assistance.

Product Overview

The Weha Donkey Pads are 4" Velcro-backed Quartz Face, surface polishing pads designed specifically to repair the surface of quartz, engineered stone polishing pads. The Weha Donkey Quartz Surface Polishing Pads will blend the texture of the polish to make it match perfectly with the rest of the top. Outstanding for quartz scratch repair, blending seams, even polishing edges the Weha Donkey pads also work incredibly well on repairing marble etch marks and resurfacing marble counters for repair.

The Weha Donkey Quartz repair polishing pads are a diamond sponge system that holds a lot of water. This works amazing when doing repair work inside a home where water is limited. The Weha Donkey pads will also work on granite surfaces as well.

How to use the Weha Donkey Quartz Face Polishing Pads:
To remove a scratch out of a quartz surface:
Start with the Weha Trio 3 step pads using the Weha Aluminum Rigid Back-up Pad or the Weha Thin Rigid back-up pad. Use all 3 pads, fanning out each grit, using the typical technique used for surface polishing. After Step 3 start with the Weha Donkey Pad 600 grit, then 1000 grit, then 2000 grit using the same fanning pattern. 1200 RPM or less. After 2000 grit, dry the surface and see if the finish is matched. If not, continue to the 3000 grit occasionally, depending on the Quartz stone, a 6000 grit may be needed. If using 7 step diamond polishing pads, bring up to 3000 grit, then start back with the Weha Donkey Pad 600 grit, then 1000 grit, then 2000 grit using the same fanning pattern. 1200 RPM or less.

To remove etch marks out of marble:
Start with the 600 grit Donkey pad with low rpm, 1800 rpm or less, and work over the area in 30-second increments. Depending on the marble and gloss, a 1000 grit and 2000 grit may be necessary.

To remove a scratch out of a granite surface:
Start with the Weha Trio 3 step pads using the Weha Aluminum Rigid Back up Pad or the Weha Thin Rigid backup pad. Use all 3 pads, fanning out each grit, using the typical technique used for surface polishing. After Step 3 start with the Weha Donkey Pad 600 grit, then 1000 grit, then 2000 grit using the same fanning pattern. 1200 RPM or less. After 1000 grit, dry the surface and see if the finish is matched. If necessary, move to the 2,000 and check. If not, continue to the 3000 grit. Occasionally, depending on the granite or Quartz stone, a 6000 grit may be needed. If using 7 step diamond polishing pads, bring up to 3000 grit, then start back with the Weha Donkey Pad 600 grit, then 1000 grit, then 2000 grit using the same fanning pattern. 1200 RPM or less.

Features

  • RPM: 1200 rpm or less. Preferred Rpm 800
  • Tip: For repairs inside the home, soak the Donkey surface polishing pads in water for at least 20 minutes to absorb water. this will provide enough water for surface repair inside the home

Features & Specifications

Brand WEHA
Diameter 4"
Position/Step/Grit 1000
Material Natural Stone, Engineered Stone
Sequence Steps 5
Wet/Dry Use Wet

Health & Safety Information

P65 Warning

Warning

This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information: www.P65Warnings.ca.gov