Out of Stock
Product Overview
Component Bonder is a two-part methacrylate, structural rodding and clip bonding adhesive designed for the structural bonding of sink clips, steel and fiberglass rodding materials, and steel and aluminum to solid surface (acrylic and polyester), engineered stone, quartz surfaces, and natural stone products. Combined at a ratio of 1:1, Component Bonder has a working time of 4 to 8 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. Component Bonder provides high strength bonds to acrylic solid surface, polyester solid surface (both filled and unfilled), and alloy solid surface (combinations of both acrylic and polyester solid surface resins) and the steel clips, rods, fiberglass and other materials. Component Bonder bonds very strongly to steel, stainless steel, and aluminum metals. Component Bonder is NOT UV STABLE, AND WILL YELLOW OVER TIME and must not be used to create imperceptible seams in countertops. However, this yellowing will not affect bond performance, but will affect bond appearance.
Features
- Dripless, quick drying formula
- High shear, tensile, and impact strength for attaching bolts, clips, sink anchors, and more
- Can be used to attach many dissimilar materials
- Adhesive cartridge that fits in many standard 1:1 and 2:1 dispensers.
Features & Specifications
| Brand | Integra Adhesives |
|---|---|
| Vendor Manufacturing Number | 32148 |
| Adhesive Type | Hybrid |
| Material | Natural Stone, Quartz, Solid Surface, Metals, Fiberglass |
| Application | Rodding, Anchoring |
| Interior/Exterior | Interior |
| Product Size | 400ml |
| Set Time | 10-15 minutes |
| Weight | 1.88 lbs |
Operating Parameters
Health & Safety Information
Warning
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information: www.P65Warnings.ca.gov
