LOG IN OR SIGN UP TO GET 10% OFF YOUR ONLINE PURCHASE OF UP TO $1,000!* USE CODE: WELCOME See Terms & Exclusions

Hertron Prime Grind System for Polishing Marble

Hertron Prime Grind 2, Gallon
Hertron Prime Grind 2, Gallon
# 118388
$61.54
Hertron Prime Grind A, Quart
Hertron Prime Grind A, Quart
# 447772
$25.24
Hertron Prime Grind A, Gallon
Hertron Prime Grind A, Gallon
# 118300
$61.80
Hertron Prime Grind M, Quart
Hertron Prime Grind M, Quart
# 113233
$25.75
Out of stock
Hertron Prime Grind M, Gallon
Hertron Prime Grind M, Gallon
# 113234
$109.70
Out of Stock Alert
Some items in this collection are temporarily out of stock. We are working hard to re-stock inventory. Place your order, and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.

Product Overview

The Prime Grind System is a premium marble and terrazzo restoration system that focuses on leveling, deep cutting, and grinding techniques to restore a wide range of stone surfaces. Designed for use by restoration contractors and other specially trained professionals.

Prime Grind "1" is used for "hardening" the marble by mop or applicator and penetrates the stone to densify the interior. After the initial diamond cut is completed, apply Prime Grind 1 liberally onto the surface using a clean, dry mop or other suitable applicators. Except for dark-colored marble, the liquid should be left to dry on the surface overnight or force dry using a carpet fan. On dark marble, rinse thoroughly before drying occurs to avoid spotting.

Prime Grind "2" is used to harden the surface of the marble. This product may be applied full strength with a spray applicator, then burnished into the marble with steel wool/hogs hair, or applied in the solution tank and worked in with the polishing diamonds.

Prime Grind "A" is applied directly to the marble with a spray applicator and then spread with steel wool or hogs hair. This is the perfect product for high-maintenance marble, or if the marble has a low calcium content.

Prime Grind "M" is applied directly to the marble with a spray applicator. Buffing until dry with steel wool or hogs hair pads. Produces a mirror polish. It may also be applied with water to enhance maintenance with auto scrubbers or applied after powder polishing to remove any swirls or imperfections

Health & Safety Information

P65 Warning

Warning

This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information: www.P65Warnings.ca.gov