10% OFF YOUR ONLINE PURCHASE OF UP TO $1,000!* USE CODE: WELCOME See Terms & Exclusions

Tenax Mastidek Cartridge Glue for Dekton

Product Name Qty

Tenax Mastidek Adhesive Vegha 215ml Cartridge
# 446909
$40.86
Tenax Mastidek Adhesive Dark Grey 215ml Cartridge
# 923364
$34.62
Tenax Mastidek Adhesive Korus 215ml Cartridge
# 923381
$40.86
Out of stock
Tenax Static Mixing Tip for Cartridge Adhesives
# 923326
$1.86
Tenax Cartridge Gun M200XMR, 1:1, 2:1, 10:1 Ratios
# 923354
$81.79
Tenax Mastidek Adhesive Light White 215ml Cartridge
# 923366
$34.62
Tenax Mastidek Adhesive Trilium 215ml Cartridge
# 923382
$40.86
Tenax Mastidek Adhesive Kadum 215ml Cartridge
# 923362
$40.86
Tenax Mastidek Adhesive Kelya 215ml Cartridge
# 923379
$40.86
Tenax Mastidek Adhesive Domoos 215ml Cartridge
# 923320
$40.86
Tenax Mastidek Adhesive Vegha 215ml Cartridge
# 923370
$40.86
Tenax Mastidek Adhesive Kadum 215ml Cartridge
# 923363
$40.86
Tenax Mastidek Adhesive Domoos 215ml Cartridge
# 923361
$28.39
Can’t find what you’re looking for? Item out of stock? Call us at 1-800-458-6222 for assistance.

Product Overview

Consentino Dekton Mastidek Cartridge Glue for Use With Dekton Mastidek Cartridge Glue for Cosentino Dekton Is A New Generation Bi-Component Resin Used To Glue Dekton. Dekton Mastidek Fast Outdoor Cartridge Glue Has A Very High Adhesion In A Short Amount of Time, Which Allows for Cutting and Polishing The Assembled Parts In A Short Time (Approximately 45-60 Minutes). The Hardened Product Is Very Shiny and Very Polishable. This Tenax Adhesive Is Produced In Special Cartridges With A 2:1 Bi-Axial Quantity 215 Ml. The Glue and Hardener Are Pre-Dosed In The Cartridge Which, Once Inserted In The Proper Gun, With The Special Mixer Fixed On Top, Allows The Correct Extrusion and Mixing of The Product. Requires Use of Special M200Xmr Cartridge Gun. Suitable for Outdoors. Directions for Use: All Surfaces Must Be Cleaned and Free of Dust and Grease. When Applying To A Polished or Glossy Surface, It Is Advised To Scrub The Surface With Sandpaper Before Gluing. Remove Cap and Attach The Special Threaded Mixing Nozzle. Squeeze Out About 6 Inches of Product Before Applying To Surface. Clean The Nozzle After Use, Replace The Cap and Discard The Mixing Nozzle. Repeat This Process At any Change of Mixer. After Usage, Clean The Nozzle, Replace The Cap and Discard The Mixer. Product Will Not Set Below 32°. Shelf Life: The Tenax Adhesive In The Cartridge Will Last At Least 12 Months If Stored Between 65° and 77°. Keep Away From Sunlight, Heat, and Humidity. Safety: Please Read The Safety Data Sheet Before Use and Follow The Product Instructions.

Features

Health & Safety Information

P65 Warning

Warning

This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information: www.P65Warnings.ca.gov

Literature