TENAX GLAXS 2:1 POLAR WHITE 215M CARTRIDGE

TENAX GLAX COLOR CARTRIDGE 215ML

Glaxs Color Cartridges are made of two previously dosed components. This multipurpose adhesive is produced in a special cartridge ratio 2+1, with 2 tubes and a mixer which allows the correct extrusion of the product very easily. Once inserted in a proper gun with 2 pistons, the product is ready for use.

Advantages:

• Zero yellowing to sun rays
• Excellent adhesion
• No oily effect or shadow
• Cures very fast at low temperatures too, +1°C
• Pre-dosed,ready-to-use system, no mixing mistakes
• Contains zero VOC

Glax is suitable for:

• Limestone
• Granite
• Onyx
• Travertine
• Solid Surface
• Stone
• Marble
• Ceramic
• Porcelain
• Quartz

Suitable for indoor and outdoor use.

Instructions for Use:

• All the surfaces to be treated must be cleaned and free of dust and grease.
• In case of glossy and/or smooth surfaces, we suggest to scrub the surfaces with sandpaper before gluing.
• Remove the threaded extremity and uncap the cartridge.
• Fix the mixer to the cartridge through the threaded nozzle.
• Before applying the glue on the surfaces, do spurge around 5 cm in line.
• Use only guns approved by Tenax, MK Sulzer ratio 2+1 H236M and Mixpac DM200-01 ratio 2+1.
• After usage, clean the nozzle, replace the cap and discard the mixer after use. Product will not set below +1°C.

The products in cartridge will last at least 18 months in the pack and 12 months out of pack, in normal conditions between 18-25°c, kept away from source of heat, humidity and sun light.