LOG IN OR SIGN UP TO GET 10% OFF YOUR ONLINE PURCHASE OF UP TO $1,000!* USE CODE: WELCOME See Terms & Exclusions

Weha Donkey Quartz Polishing Pad 5" 2000 Grit

Product Overview

Donkey Quartz Inline and Face Polish Surface Polishing Pad for Quartz, Engineered Stone, Marble, Granite

Weha Velcro backed edge wheels are built and designed specifically for horizontal machines such as Comandulli machines, Montresor edge polishers as well as vertical polishing machines: Sasso Flying Flat, Park Industries FastBack, GMM Tower, Marmo 711, and other polishing machines. Designed to accommodate between 5-9 heads, the Weha inline polishing combo system will create a fantastic polish on marble, granite, dark quartz, light quartz, quartzite, porcelian, ceramic, sintered stone, etc. The Weha inline polishing wheels are velcro backed for quick replacement without the hassle of removing the snail lock holders. The Step 0 is not needed under normal circumstances. Only use #0 if the edge is not flat or extremely rough and needs some stock removal before step 1.

How to use the Weha 5" Donkey Quartz Polishing Pads for Vertical and Horizontal Inline Machines:

This Weha combo system took several months of R & D and has been tested on 5 head vertical machines as well on up to 8 head horizontal machines. The combination of the Weha 5" Inline 3 Step pads and Donkey pads is producing an excellent polish on all materials with all machines. The Weha 5" Donkey Pads can also be used to repair the surface of quartz, engineered stone polishing pads as well. They can be used by hand, on planetary polishers, floor machines, single head machines, as well as cnc machines. The Weha Donkey Polishing Pads will blend the texture of the polish to make it match perfectly with the rest of the top. Outstanding for quartz scratch repair, blending seams, even polishing edges. The Weha Donkey pads also work incredibly well on repairing marble etch marks and resurfacing marble counters for repair. The Weha Donkey polishing pads is a diamond sponge system that holds a lot of water. This works amazing when doing repair work inside a home where water is limited.

Features

  • For 5 head machines: Step 1,2,3, Donkey Pad 1000,2000 or 2000,3000 depending on the stone and how much gloss you need to match.
  • Typical quartz: use 1,2,3, Donkey Pad 1000,2000
  • For greater texture: use Step 1,2,3 Donkey pad 600,1000
  • For 6 or more head machines the sequence can be the same as the 5 head sequence. You may add the 3000 grit Donkey for the occasional very difficult granite.
  • Step 1: 3 Bar
  • Step 2-6: 2.5 Bar
  • Feedrate: 80-120cm per minute, depending on machine
  • RPM: 1200 rpm or less. Preferred Rpm 800

Features & Specifications

Brand WEHA
Vendor Manufacturing Number 136920
Diameter 5"
Position/Step/Grit 2000
Material Natural Stone, Engineered Stone
Wet/Dry Use Wet

Health & Safety Information

P65 Warning

Warning

This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information: www.P65Warnings.ca.gov