There is no doubt that the electric angle grinder is the most popular portable power tool in stone fabrication. It is normal to see such grinders being used in almost all stone fabrication shops, whether creating dust or blowing dust into a vacuum system. Introducing the Alpha® PSC-600 which is a newly developed high-performance wet pneumatic stone cutter that will set a new “normal” in stone fabrication shops. It is common knowledge that electric power tools don’t last very long due to the stone dust or the water splash which damages them easily. This is why most of the polishers nowadays are pneumatic-driven polishers. The PSC-600 comes with a very unique center water-feed system to deliver ample water on the both sides of the diamond blade, which will keep the dust down on the floor and also enhance the performance and life of the diamond blade. In addition, we made the end case with a composite material to prevent freezing which is a common issue for hands, by the rear exhaust system, in consideration of operator comfort. The Alpha® PSC-600 is smaller and lighter than electric angle grinders and offers better maneuverability along with all the safety features. This turn-key operation stone cutter comes with 15 ft. all–weather hoses and a convenient water quick coupler with shut off valve.
|Vendor Manufacturing Number||PSC-600|
|Air Consumption||15 CFM|
|Air Inlet||1/4" BSPP|
|Air Pressure||85 PSI|
|Equipment Included||(1) Air Hose (15ft / 4.5m);(1) Water Hose (15ft / 4.5m);(1) Side Handle (reversible);(1) Rust Inhibitor Oil (6.7oz / 200ml)(1) Screw (/O-Ring Seal for Oil Port);(1) Exhaust hose with Clamp;(1) Spring Washer;(1) 6" Safety Guard; (1) Double End Wren|
|Water Inlet||1/8" BSPP|
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.For more information: www.P65Warnings.ca.gov