Out of Stock
Item Temporarily Out of Stock
We are working hard to re-stock inventory of this item. Place your order, and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
Product Overview
Tenax Glax Color Cartridge 215Ml Glaxs Color Cartridges Are Made of Two Previously Dosed Components. This Multipurpose Adhesive Is Produced In A Special Cartridge Ratio 2+1, With 2 Tubes and A Mixer Which Allows The Correct Extrusion of The Product Very Easily. Once Inserted In A Proper Gun With 2 Pistons, The Product Is Ready for Use. Advantages: Zero Yellowing To Sun Rays Excellent Adhesion No Oily Effect or Shadow Cures Very Fast At Low Temperatures Too, +1°C Pre-Dosed,Ready-To-Use System, No Mixing Mistakes Contains Zero Voc Glax Is Suitable for: Limestone Granite Onyx Travertine Solid Surface Stone Marble Ceramic Porcelain Quartz Suitable for Indoor and Outdoor Use. Instructions for Use: All The Surfaces To Be Treated Must Be Cleaned and Free of Dust and Grease. In Case of Glossy and/or Smooth Surfaces, We Suggest To Scrub The Surfaces With Sandpaper Before Gluing. Remove The Threaded Extremity and Uncap The Cartridge. Fix The Mixer To The Cartridge Through The Threaded Nozzle. Before Applying The Glue On The Surfaces, Do Spurge Around 5 Cm In Line. Use Only Guns Approved By Tenax, Mk Sulzer Ratio 2+1 H236M and Mixpac Dm200-01 Ratio 2+1. After Usage, Clean The Nozzle, Replace The Cap and Discard The Mixer After Use. Product Will Not Set Below +1°C. The Products In Cartridge Will Last At Least 18 Months In The Pack and 12 Months Out of Pack, In Normal Conditions Between 18-25°C, Kept Away From Source of Heat, Humidity and Sun Light. Features & Specifications
| Brand | TENAX |
|---|---|
| Vendor Manufacturing Number | 1RGLAXSCNATURALSPRIN |
Health & Safety Information
Warning
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information: www.P65Warnings.ca.gov
