Product Overview
TX3 is a rapid set, high strength low viscosity concrete repair material designed to repair spalled concrete, cracked concrete, and for filling pin holes and small surface defect treatment on concrete floors before polishing. This two-component, 1:1 system is also designed to repair damaged joints, cracks, spalls, and other concrete surface defects. Spall TX3 has additional working time when compared to TX, which makes it well suited as a pre-polish filler. Spall TX3 can be hand mixed and troweled across concrete floors. It can also be mixed with sand and cement to create a repair mortar material. Spall TX3 is low viscosity, 100% solids and VOC free.
Features
- Rapid set, high strength formula
- Repairs damaged joints, cracks, spalls, and other surface defects
- Drive-Over in 45 minutes
- Cures From -20ºF to 130ºF
- Optimal shore D hardness range for strength, wear, and tear
- Self-leveling and self-priming
- Can be mixed with dry aggregate
Features & Specifications
| Application | Repair |
|---|
Operating Parameters
Health & Safety Information
Warning
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information: www.P65Warnings.ca.gov